stunthanger.com

General control line discussion => Open Forum => Topic started by: steven yampolsky on January 26, 2013, 12:55:19 PM

Title: Another installment of hand modeling!
Post by: steven yampolsky on January 26, 2013, 12:55:19 PM

http://youtu.be/DIbbbpQyTrw

Title: Re: Another installment of hand modeling!
Post by: Larry Fernandez on January 26, 2013, 01:34:09 PM

Thanks for posting Steve.
Did you make up the alignment blocks for the leading edge?
If so, would you be interested in makeing up a set to sell to me.

That is a pretty slick jig set-up

Larry, Buttafucco Stunt Team

Title: Re: Another installment of hand modeling!
Post by: steven yampolsky on January 26, 2013, 02:23:13 PM

Quote from: Larry Fernandez on January 26, 2013, 01:34:09 PM

Thanks for posting Steve.
Did you make up the alignment blocks for the leading edge?
If so, would you be interested in makeing up a set to sell to me.

That is a pretty slick jig set-up

Larry, Buttafucco Stunt Team

You can have mine once I'm done. Send me your mailing info

Title: Re: Another installment of hand modeling!
Post by: MarcusCordeiro on January 26, 2013, 02:53:34 PM

Nice jig!!

Marcus

Title: Re: Another installment of hand modeling!
Post by: Phil Hawkins on January 26, 2013, 10:44:11 PM

Steven, You mention this is from a kit... Which one? Nice post, Thumbs up! you are using CYA?

Title: Re: Another installment of hand modeling!
Post by: steven yampolsky on January 26, 2013, 10:48:08 PM

Quote from: MarcusCordeiro on January 26, 2013, 02:53:34 PM

Nice jig!!

It's super easy to make too! Check you my earlier viedeos where I talk about building it. Here's the construction series. I am adding new videos as I build.

http://www.youtube.com/playlist?list=PLwSse-lP9gywxBnaaaaGRDhZI0MWEMc2v

Quote from: Phil Hawkins on January 26, 2013, 10:44:11 PM

Steven, You mention this is from a kit... Which one? Nice post, Thumbs up! you are using CYA?

The kit is of Yak 9D from Wings on Strings. Yes, I'm using CYA. I even made a review of CA's:

http://youtu.be/mlikr-_8z74

Title: Re: Another installment of hand modeling!
Post by: Phil Hawkins on January 26, 2013, 10:54:00 PM

Very cool.  For those interested, on the Youtube vids, if you look to the right of Steven's name you will notice "12 videos" click on that and you will see more of this build. Thanks for posting Steven.

Title: Re: Another installment of hand modeling!
Post by: Mike Griffin on January 27, 2013, 10:00:54 AM

Very very nice Steve.  That is the YAK9 kit if I am not mistaken.   This is a very good way to build the wing on that kit or any other kit.  You really can't build a crooked wing by using this method.  It is simple and very efficient.
Wonderful job on the videos Steve and we need more folks like you to share methods like this.  Just wanted to say thank you for the help you have given me...

Mike

Title: Re: Another installment of hand modeling!
Post by: ron young on January 27, 2013, 11:55:58 AM

Hi Steven thank you so much for your efferts i so enjoy these videos keep up the great work,i am novice with little mechanical ability so these are motivating .
Thanks again
Ron

Title: Re: Another installment of hand modeling!
Post by: Chuck_Smith on January 28, 2013, 05:02:40 PM

Steve,
Very cool. Nice work. Thanks, You taught an old dog a new trick.

Chuck

Title: Re: Another installment of hand modeling!
Post by: Mike Lauerman on January 28, 2013, 05:38:25 PM

Hi, Steve! Taking this opportunity to thank you for the in-depth report on different CYAs.

I like the simplicity and practicality of your wing jig. (I must have started 3 different concepts, this is the one that makes sense!)