stunthanger.com
General control line discussion => Open Forum => Topic started by: RandySmith on February 01, 2017, 09:15:46 AM
-
PA 75 production has started, I am cleaning machining , honing and will be fittings and putting these together, it will be about 4 to 5 weeks for these to be made , boxed, and I will be shipping these as they were bought, the first 25 engines are shipping now
If you have one on order please contact me about confirm and shipping will need to be paid
Randy
-
PA 75 production has started, I am cleaning machining , honing and will be fittings and putting these together, it will be about 4 to 5 weeks for these to be made , boxed, and I will be shipping these as they were bought
Randy
I see mine! Third from the left :)
-
How cool to see my new motor before it gets assembled!
Larry, Buttafucco Stunt Team
-
Ooooohhhhh....now, a plane to rest it in!
Shug
-
more pics Piston Sleeves
-
blank
-
Ooooohhhhh....now, a plane to rest it in!
Shug
Here's where mine is going.
Larry, Buttafucco Stunt Team
-
Cool pictures Randy!
-
;D ;D ;D ;D
#^ #^ #^ #^ #^ #^ #^ #^ #^ #^ #^
-
I see mine! Third from the left :)
Yours is the one he dropped on the concrete floor.
-
Damn you student loans!!! mw~
-
Randy,
Thanks for the update:)
-
Randy, I see a couple of side exhaust motors in there. What's the story on them?
-
If someone wants to sponsor the engine program I'll build a Spruce Goose. D>K
-
How many total in this run ?
-
Its almost Christmas!!!!!!!!
Don
-
Yours is the one he dropped on the concrete floor.
you must be very, GOOD OL´FRIENDS....
Very Kind words ....that's........ why I very like this Forum.
Awesome work...Randy....thanks for pics. .
https://www.youtube.com/watch?v=ECZ_k5yOKMs
-
Very cool Randy. Great job!
-
Does Henry do the piston fit?
MM
NO but he did chrome the sleeves
-
Randy, I see a couple of side exhaust motors in there. What's the story on them?
40s 51s 61s mostly pre-sold motors
Randy
-
How many total in this run ?
this run was more than 100
Randy
-
Hey Randy, working on any new sources for carbon props for these ?
-
Hey Randy, working on any new sources for carbon props for these ?
I just got a couple from him. He probably has more. Give him a call.
-
Hey Randy, working on any new sources for carbon props for these ?
yes they are in stock
Randy
-
First batch being shipped , this is after assembly .....
shown below most of the 38 parts to make a 75
Randy
-
Hey Randy....excited to get my .75.
What size prop do you recommend for the .75 in two blade and 3 blade?
And also what muffler?
Thankee.
Shug
-
First batch being shipped , this is after assembly .....
shown below most of the 38 parts to make a 75
Randy
Cases really look nice. Cant wait to get it.
So what are the 2 brass colored parts just below the needle ?
Is the porting/timing on this batch same as earlier 75's ?
-
Hey Randy....excited to get my .75.
What size prop do you recommend for the .75 in two blade and 3 blade?
And also what muffler?
Thankee.
Shug
HI the best prop 13.5 x 4.5 3 blade cf , the 2 blade size ranges from wide blade 14 x 4.5 to 15 x 4.8 although not many can stand the diameter of the 2 blades, Ships like Al Rabe Bearcat and other have ran the 15 x 4,8
Randy
-
Cases really look nice. Cant wait to get it.
So what are the 2 brass colored parts just below the needle ?
Is the porting/timing on this batch same as earlier 75's ?
There are 3 option for the Needle assembly, the other 2 are shown below, hi flow needle with fuel pickup and needle on same side, ( wonderful for side ex motors ) and the remote needle
This batch is exactly the same as the last PA 75s , no need to change anything
If you owe S&H please contact me as most all will have to have shipping added
Randy
-
Hey Randy....excited to get my .75.
What size prop do you recommend for the .75 in two blade and 3 blade?
And also what muffler?
Thankee.
Shug
Although the 3 blade carbons are best, in my opinion , I have used These on the 75
J Zinger wood 15 x 5 depitched slightly
Jo Z woo 14 x 5 PRO series depitched slightly ( cut in opposite Phillips entry)
If you can find the a 16 x 4.5 REV UP cut to 14 14.5 or 15 works very well too
Not sure about other brand wood props, but no reason the wouldn't work
Randy
-
There are 3 option for the Needle assembly, the other 2 are shown below, hi flow needle with fuel pickup and needle on same side, ( wonderful for side ex motors ) and the remote needle
This batch is exactly the same as the last PA 75s , no need to change anything
If you owe S&H please contact me as most all will have to have shipping added
Randy
I'm liking that remote needle option, especially with the right angle inlet.. Does that come with motor or is it extra ?
-
I'm liking that remote needle option, especially with the right angle inlet.. Does that come with motor or is it extra ?
How do you mount the remote needle and how does the fuel get to the Venture. What am I not understating?
-
I'm liking that remote needle option, especially with the right angle inlet.. Does that come with motor or is it extra ?
NO it does not come with the engine, the Standard Spray bar arrangement does, I really do not recommend the remote NVA, although the same side one does work very well on the PA engines
Any of the 3 is availble s, and sold separate
Randy
-
How do you mount the remote needle and how does the fuel get to the Venture. What am I not understating?
Remote mount , NVA mounts to the fuse sides bulk head or engine backplate , then a short piece of tubing to the spraybar, I don;t recommend them if you want any cycling in the engine, it seems to slow it down and makes the needle setting very coarse
Randy
-
Here's where mine is going.
Larry, Buttafucco Stunt Team
Where do the batteries go, Larry?
-
NO it does not come with the engine, the Standard Spray bar arrangement does, I really do not recommend the remote NVA, although the same side one does work very well on the PA engines
Any of the 3 is availble s, and sold separate
Randy
The "Same Side" option, looks like it also has the elbow fuel inlet, is that right ?
-
Here's where mine is going.
Larry, Buttafucco Stunt Team
You really need to stop taking pictures of models built by other flyers and then claiming them as your own.
Those wings don't have monocote on them, so they can't be yours.
-
Uhhhhhhhhh...Might as well give it up Larry. You can't win!
LL~ LL~ LL~ LL~ LL~ LL~
Randy Cuberly
-
Where do the batteries go, Larry?
I'm afraid I just don't know how to reply to this.
(And I keep telling people what a nice guy you are.) H^^
Larry, Buttafucco Stunt Team
-
I'm afraid I just don't know how to reply to this.
(And I keep telling people what a nice guy you are.) H^^
Larry, Buttafucco Stunt Team
Let me help you out Larry. The battery goes on that thingy that sticks out of the head of the engine........ LL~ LL~ LL~ LL~
Jerry
-
You really need to stop taking pictures of models built by other flyers and then claiming them as your own.
Those wings don't have monocote on them, so they can't be yours.
Keep it up wise guy
your time is comming VD~
Larry, Buttafucco Stunt Team
-
The battery goes on that thingy that sticks out of the head of the engine.
Jerry
I thought that thingy is called a thingababog.
But I have been wrong before about this stuff.
Keith
-
Dohicky
-
First and second batch of 25 is now all shipped, 3rd batch is shipping now and 4th is in progress to be in shipping soon, the final 5th batch will be shipping very soon .
There will be an over run batch made up later when I receive the parts
Randy
-
Photo people have asked for on mufflers , shown K-77 with 77 - 75 muffler, PA 51 with 40 - 61 muffler aluminum and PA 75 engine
Randy
-
Metallic porn!
Wonderful work Randy.