News:



  • July 03, 2025, 07:13:23 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: An Iron On Tutorial  (Read 4428 times)

Mike Griffin

  • Guest
  • Trade Count: (0)
An Iron On Tutorial
« on: November 06, 2014, 06:38:44 PM »
Have any of the masters of Iron on covering ever posted a tutorial on here?  I ran a couple searches and did not find one.

Thank you

Mike
Logged

Offline Jason Greer

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 487
Re: An Iron On Tutorial
« Reply #1 on: November 06, 2014, 07:29:07 PM »
There are some really good videos on YouTube. This is also a good article:
http://www.amaflightschool.org/diy/how-cover-model-airplane
Logged
El Dorado, AR
AMA 518858

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: An Iron On Tutorial
« Reply #2 on: November 06, 2014, 08:09:55 PM »
I'm certainly no master, but i posted in the ots section a kinda "how i did it" on two tone monokote with shapes. this plane is 100% monokote
Logged

Offline Phil Krankowski

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1031
Re: An Iron On Tutorial
« Reply #3 on: November 06, 2014, 08:42:47 PM »


This piece of insanity?  I really want to try this sometime.

Phil
Logged

Offline Jason Greer

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 487
Re: An Iron On Tutorial
« Reply #4 on: November 06, 2014, 08:51:13 PM »
I have used that technique quite a bit. It really does work great.
Logged
El Dorado, AR
AMA 518858

Mike Griffin

  • Guest
  • Trade Count: (0)
Re: An Iron On Tutorial
« Reply #5 on: November 07, 2014, 07:07:50 AM »
Thanks for the information guys.

Mike
Logged

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Re: An Iron On Tutorial
« Reply #6 on: November 07, 2014, 07:25:45 AM »
Quote from: Dane Martin on November 06, 2014, 08:09:55 PM
I'm certainly no master, but i posted in the ots section a kinda "how i did it" on two tone monokote with shapes. this plane is 100% monokote

Dane, where did the Ringmaster art/lettering come from?
Logged
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Offline Serge_Krauss

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1330
Re: An Iron On Tutorial
« Reply #7 on: November 07, 2014, 07:41:00 AM »
Mike-

The search function on SSW doesn't always seem to pick up everything it should, but I remembered this post by John Miller. So it took four different approaches (including one by each of John's monikers under 'author') before I finally found it:

http://www.clstunt.com/htdocs/dc/dcboard.php?az=show_topic&forum=103&topic_id=74286&mesg_id=74286&listing_type=search

There is a wealth of information in that archive.

SK
Logged

Mike Griffin

  • Guest
  • Trade Count: (0)
Re: An Iron On Tutorial
« Reply #8 on: November 07, 2014, 07:54:16 AM »
Thank you Serge.

Mike
Logged

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: An Iron On Tutorial
« Reply #9 on: November 07, 2014, 09:51:48 AM »
Charles,
John stiles gave me the art. then its cut out of monokote. the AMA letters and numbers are monokote cut with a plotter similar to a Cricket.
Logged

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7468
  • Just here for the fun of it also.
Re: An Iron On Tutorial
« Reply #10 on: November 07, 2014, 09:56:56 AM »
Quote from: Dane Martin on November 07, 2014, 09:51:48 AM
Charles,
John stiles gave me the art. then its cut out of monokote. the AMA letters and numbers are monokote cut with a plotter similar to a Cricket.

Dane,

John sent me the art also and I turned it into vinyl stickers. It's nice art.

Your Ringmaster looks great!
Logged
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.

Offline Larry Renger

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4060
Re: An Iron On Tutorial
« Reply #11 on: November 07, 2014, 09:59:59 PM »
You want Monokote expertise? I give to you! Get Faye Stilley's two books. Many time winner of the best monokote award at the Eastern shows. I have seen him flawlesslycover a fully compound wingtip at the AMA Expo in a demo session.

I saw it, I believe it is doable, but the guy is AMAZING. And je lets it all hang out in his books.

Sadly, I loaned my copies to someone and never got thm back! mw~
Logged
Think S.M.A.L.L. y'all and, it's all good, CL, FF and RC!

DesignMan
 BTW, Dracula Sucks!  A closed mouth gathers no feet!

Offline dirty dan

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 330
Re: An Iron On Tutorial
« Reply #12 on: November 13, 2014, 01:15:14 PM »
Quote from: Larry Renger on November 07, 2014, 09:59:59 PM
You want Monokote expertise? I give to you! Get Faye Stilley's two books. Many time winner of the best monokote award at the Eastern shows. I have seen him flawlesslycover a fully compound wingtip at the AMA Expo in a demo session.

I saw it, I believe it is doable, but the guy is AMAZING. And je lets it all hang out in his books.

Sadly, I loaned my copies to someone and never got thm back! mw~


I kinda/sorta agree, but first one must go to the application. If ya want what is admittedly a superbly finished model and it just has to be wrapped in plastic, get these books and practice. A lot. And then keep the model(s) sealed and away from flying fields or even transport to these fields.

Ah, but if you want to actually handle your models, put them to the uses for which they are designed, at least take a glance at "Tom's Techniques" from Harry Higley. And then roam around the RC sites. There are some amazing techniques out there, few of which one is likely to encounter on any CL website.

Dan


Logged
Dan Rutherford

Mike Griffin

  • Guest
  • Trade Count: (0)
Re: An Iron On Tutorial
« Reply #13 on: November 14, 2014, 10:09:20 AM »
I ordered the book from Amazon.....looking forward to reading it

Mike
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: