Aluminum test stand (Tatone)

[Bootlegger]

  Guy's I'm lookin for an aluminum run in stand that is made by Tatone.
 If anybody can help, I'd be obliged...

[Bob Reeves]

Haven't looked but am pretty sure you can get these from Tower..

[Larry Price]

I found this test stand on the bay.    It is hell built for stout.    Very nice workmenship...

Edit.... I found the seller's e-mail, skengineering@netzero.net.
He also builds some very nice compression gauges. I have no idea if he's still in business...... 

[Richard Grogan]

  Guy's I'm lookin for an aluminum run in stand that is made by Tatone.
 If anybody can help, I'd be obliged...

Here ya go....
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXR586&P=ML

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXR588&P=7

I liked my old maple EZ Just one, but it got left outside and rotted a little. The second one is the one I have, it works just fine.

[Marvin Denny]

  I prefer the wood ones

  Bigiron

[Glen Wearden]

Re: Richard's post.  I bought the one in the first attachment about 18 months ago.  As I recall, the one in the second attachment wasn't listed.  Mine works fine.  I replaced the machine bolts that secure the motor mounting blocks with carriage bolts, because it was hard to get to the heads to keep them from turning when tightening the bolts.  I also replaced the sheetmetal screws with bolts.  The one in the second attachment looks like it is more user friendly than the first.  FWIW          Glen

[Garf]

Check this one:

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXR587

[Bob Disharoon]

Ill vote for the good ole maple ez just..that thing really bites onto an engine mount!

[George]

One thing to consider is that if you sometimes use smaller engines, you will have to break them in without a muffler if you have a test stand with the bolts facing up (esp. with wingnuts).

I thought my old test stand was an E-Z Just, but upon checking I can faintly see "Perfect" on it. Did Perfect make the E-Z Just stands? This ancient one is from the fifties.

The one I use for larger engines is from about 10 years ago, also wood (came in a kit) but I can't remember the brand name. The brand name does not appear on the stand, just on the assembly instructions.

George

[Bootlegger]

  <=b   Thanks a lot guy's.. As always the question can be answered here...
  Found some ...Again I thank all ya'll........That's Southern for thanks everybody...

[Richard Grogan]

<=b   Again I thank all ya'll........That's Southern for thanks everybody...

Gil,You still comming this weekend ? Gonna be fun!!

[Bootlegger]

  Bro Richard, as far as I know we'll be leaving Baton Rouge Friday about noon.
  What is going on over there that motel rooms are at such a premium

[Richard Grogan]

I dunno Gil. I've never stayed in one here. I might have to after Saturday though....

[Bob Zambelli]

If all else fails, build your own!!!

(Although this was just for fun, I too prefer the wooden ones)

 Bob Z.