stunthanger.com

General control line discussion => Open Forum => Topic started by: Ted Winterman on March 22, 2009, 02:12:05 PM

Title: ACRO-60 Building sequence photos
Post by: Ted Winterman on March 22, 2009, 02:12:05 PM

     
     I wanted to share some of my building techniques with others who may find some value for their
own ways of construction. All parts mounted with epoxy.

     1. 1/8th fusalage sides-.003th unidirectional carbon fiber-1/64th plywood doublers.
     2. Fusalage sides sanded to 3/32 aft of trailing edge for lightness.
     3. All parts cut out and shaped for mounting on each side.
     4. engine bearers mounted.
     5. Black section at end of fusalage is .003 carbon fiber mounted vertical for stabilizer torque stiffness.
     
     


     
     

Title: Re: ACRO-60 Building sequence photos
Post by: Glenn (Gravitywell) Reach on March 22, 2009, 02:49:13 PM

So how come you don't build 2 left sides like I do?  HB~> H^^

Title: Re: ACRO-60 Building sequence photos
Post by: Ted Winterman on March 22, 2009, 02:55:41 PM

     Hi Gravitywell.

     At my age I have to be very carefull!

     Ted #^

Title: Re: ACRO-60 Building sequence photos
Post by: Michael Floerchinger on March 23, 2009, 12:41:56 PM

Hello Ted!

I see you have your computer back!

I really enjoyed breakfast and hanging out with you at the Ice O lated ……………….. just like old times …………….. except we are the old times!

Title: Re: ACRO-60 Building sequence photos
Post by: the original Steve Smith on March 25, 2009, 09:20:47 PM

Quote from: Michael Floerchinger on March 23, 2009, 12:41:56 PM

Hello Ted!

I see you have your computer back!

I really enjoyed breakfast and hanging out with you at the Ice O lated ……………….. just like old times …………….. except we are the old times!

Hey Michael - Ted has a New computer!  I convinced him to get one!  y1