News:


  • April 19, 2024, 10:52:48 AM

Login with username, password and session length

Author Topic: 1989 VSC Footage part 1  (Read 1788 times)

Online RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12408
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
1989 VSC Footage part 1
« on: June 26, 2018, 03:03:12 AM »

Shot by Dee Hill
AMA 12366

Offline FLOYD CARTER

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4458
    • owner
Re: 1989 VSC Footage part 1
« Reply #1 on: June 26, 2018, 09:47:00 AM »
Blast from the Past!  Looks cold and foggy, but I only remember it was warm and sunny when my turn to fly.
89 years, but still going (sort of)
AMA #796  SAM #188  LSF #020

Offline Dennis Adamisin

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4340
Re: 1989 VSC Footage part 1
« Reply #2 on: June 26, 2018, 10:32:02 AM »
Terrific, now i'm about a half-dozen videos behind!  Thanks to Dee and Sparky for these
Denny Adamisin
Fort Wayne, IN

As I've grown older, I've learned that pleasing everyone is impossible, but pissing everyone off is a piece of cake!

Offline Ted Fancher

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2326
Re: 1989 VSC Footage part 1
« Reply #3 on: June 26, 2018, 11:08:37 AM »
Sparky,

I'd love to "like" the video but found no obvious way to do so at the end of the VSC video.  You got a "primer" for us non state of the Silicon Valley art types?

Thanks

Ted

Offline Elwyn Aud

  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1301
    • Inferalandings Photo Page
Re: 1989 VSC Footage part 1
« Reply #4 on: June 26, 2018, 04:58:02 PM »
You can hit the "Like" button when viewing the video over on YouTube.  Was that Tom Lay with a clipboard at 23:50?

Offline Mike Keville

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2320
Re: 1989 VSC Footage part 1
« Reply #5 on: June 26, 2018, 07:20:33 PM »
Wow!  Memory Lane!!!  (But who was that YOUNG guy on the bullhorn during the pilots' meeting?  <chuckle>

FORMER member, "Academy of Multi-rotors & ARFs".

Offline Jim Hoffman

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 570
Re: 1989 VSC Footage part 1
« Reply #6 on: June 26, 2018, 07:35:02 PM »
Thanks Robert for doing this.  Great memories

I enjoyed seeing my old OTS mustang and the absence of grey hair.


Jim Hoffman

Online RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12408
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
1989 VSC Footage part 2
« Reply #7 on: June 27, 2018, 01:08:08 AM »
Paart 2


Thanks to Dee Hill for this footage and it was uploaded as is.
« Last Edit: June 27, 2018, 01:29:22 AM by RC Storick »
AMA 12366

Online RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12408
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: 1989 VSC Footage part 3
« Reply #8 on: June 27, 2018, 04:27:24 AM »
AMA 12366

Offline James Holford

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1515
Re: 1989 VSC Footage part 1
« Reply #9 on: June 27, 2018, 04:49:26 AM »
Thanks Sparky!!!!!

Sent from my SAMSUNG-SM-G891A using Tapatalk

Jamie Holford
Baton Rouge Bi-Liners
Lafayette, La
AMA #1126767

Offline Andre Ming

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 872
Re: 1989 VSC Footage part 1
« Reply #10 on: June 27, 2018, 09:43:31 AM »
Thanks Sparky for uploading this. And thanks to De for sharing it. De has always been a very staunch supporter of preserving  C/L's history. I respect that about him. Every now and then I still get out De's "Scarinzi's Basement" video and chuckle at the antics therein. What a hoot!

Andre
Searching to find my new place in this hobby!

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22769
Re: 1989 VSC Footage part 1
« Reply #11 on: June 27, 2018, 10:23:26 AM »
Andre, you need to post he video. ???

Thanks to Sparky and De for the videos.  Seeing all the faces of my heroes of modeling and stunt.   My first VSC was a dream getting to meet them in person and then a year later when I drove all by myself when I heard that Dale Kirn and Bob Palmer where going to fly.   There are so many memories that I could bore every body for the rest of the day.    H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline FLOYD CARTER

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4458
    • owner
Re: 1989 VSC Footage part 1
« Reply #12 on: June 27, 2018, 11:55:50 AM »
On VSC part 2, at 1:01 shows my Madman/Orwick 64 entry (white/red, AMA #796).

On my second flight, I got too close to the asphalt and pancaked it in.  Minimum damage.
89 years, but still going (sort of)
AMA #796  SAM #188  LSF #020

Online RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12408
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
1989 VSC Footage part 4
« Reply #13 on: June 27, 2018, 05:05:40 PM »
Last of the footage I have. Special thanks to Ken Budensiek for sending me these treasures.

Also thanks to De Hill for shooting the film.


AMA 12366

Offline James Holford

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1515
Re: 1989 VSC Footage part 1
« Reply #14 on: June 27, 2018, 05:07:18 PM »
Thanks again tp you Sparky...De...and Ken!!!!!  For anyone who loves Old Time or needs that kick in the ass to fly it... must watch these vids!!
Last of the footage I have. Special thanks to Ken Budensiek for sending me these treasures.



Sent from my SAMSUNG-SM-G891A using Tapatalk

Jamie Holford
Baton Rouge Bi-Liners
Lafayette, La
AMA #1126767


Advertise Here
Tags:
 


Advertise Here