Author Topic: 1/2A TWISTER (it's done) (Read 1920 times)

Phil Coopy · « **on:** March 13, 2006, 10:21:49 AM »

Here it is, finshed! Don't know if the flaps will be effective at anything but providing drag but it's worth the try. Came out at 7.28oz with the engine mounted.

Manuel Cortes · « **Reply #1 on:** March 13, 2006, 10:49:35 AM »

A litlle beauty!!!!!!

Let´s know how it flies, please.

Regards.

frank carlisle · « **Reply #2 on:** March 13, 2006, 01:53:41 PM »

phil,
you get a karma point from me. that was a quick job and it came out nice. be sure to give a report on the flaps.

Russell Shaffer · « **Reply #3 on:** March 13, 2006, 04:40:45 PM »

Looks great! What size prop are you planning to use?

Phil Coopy · « **Reply #4 on:** March 13, 2006, 06:50:43 PM »

6-3 6-4

?

Bill Little · « **Reply #5 on:** March 14, 2006, 06:23:06 AM »

Hi Phil,
You should have a ball with that one!

I really like it, and at that weight it should fly pretty good!
A 6-3 or 6-4 sounds about right for a Black Widow.

john e. holliday · « **Reply #6 on:** March 14, 2006, 08:13:18 AM »

Yep, that little critter sure looks good. Keep us up to date on the flying of it. DOC Holliday

minnesotamodeler · « **Reply #7 on:** March 14, 2006, 10:52:55 AM »

You might give a 6-2 prop a try, too. That's what I'm currently using on my LittleAxe, course it has a Norvel .061 in it too...anything over 2" pitch is too fast. Maybe I oughtta look for a 7" prop.

--Ray

Author Topic: 1/2A TWISTER (it's done) (Read 1920 times)

Phil Coopy

1/2A TWISTER (it's done)

Manuel Cortes

Re: 1/2A TWISTER (it's done)

frank carlisle

Re: 1/2A TWISTER (it's done)

Russell Shaffer

Re: 1/2A TWISTER (it's done)

Phil Coopy

Re: 1/2A TWISTER (it's done)

Bill Little

Re: 1/2A TWISTER (it's done)

john e. holliday

Re: 1/2A TWISTER (it's done)

minnesotamodeler

Re: 1/2A TWISTER (it's done)