Post by: Paul Taylor on October 27, 2017, 04:35:06 PM
My goal was to lose weight and mostly in the tail. ( that's what she said)
I think I have done the best I could for what it is. I stripped it down and replaced a few panels. I airbrushed acrylic paint on and did not mask anything. I did that so I would not pull up any paint. And have that airbrushed look. 2k over entire plane. It is what it is. A tool. 52oz. PA 40UL.
(https://uploads.tapatalk-cdn.com/20171027/bdaeec34c52631d6139dc79beff2d2ef.jpg)
Sent from my iPhone using Tapatalk
Post by: Paul Taylor on October 27, 2017, 04:37:18 PM
Post by: Dane Martin on October 27, 2017, 04:42:38 PM
Post by: James Holford on October 27, 2017, 06:38:13 PM
Sent from my SAMSUNG-SM-G891A using Tapatalk
Post by: john e. holliday on October 27, 2017, 06:47:11 PM
Post by: James Holford on October 27, 2017, 06:52:33 PM
Sent from my SAMSUNG-SM-G891A using Tapatalk
Post by: Paul Taylor on October 27, 2017, 09:33:04 PM
I too like the looks of the affect it has. How you got nice straight lines with an air brush is amazing.Thanks Doc. It's not hard.
Sent from my iPhone using Tapatalk
Post by: Paul Taylor on October 27, 2017, 09:35:28 PM
So you used acylic paint.. then clear coated? Hmmm that opens up options on my end and I have quite a bit of acrylic from my plastic modeling....Yep. Tamiya paints.
Sent from my SAMSUNG-SM-G891A using Tapatalk
This plane was painted with it as well on the top. (https://uploads.tapatalk-cdn.com/20171028/724cb4d45091087ce261444afbf25b4b.jpg)
Sent from my iPhone using Tapatalk
Post by: James Holford on October 28, 2017, 05:27:23 AM
Yep. Tamiya paints.Have plenty of tamiya paints!! Reckon I will habe to go follow up on your build thread on covering and such. I knew I should habe asked you bout all this last weekend.
This plane was painted with it as well on the top. (https://uploads.tapatalk-cdn.com/20171028/724cb4d45091087ce261444afbf25b4b.jpg)
Sent from my iPhone using Tapatalk
Sent from my SAMSUNG-SM-G891A using Tapatalk
Post by: Paul Taylor on October 28, 2017, 10:00:21 AM
I'm a slow learner.😜
And as he always tells me ... it's just balsa wood and paper.
Post by: Avaiojet on October 28, 2017, 11:19:59 AM
I've been using them for years and have mentioned this in my many Threads, plenty of times.
Glad to see the information in my Threads are being put to good use. ;D
CB
Post by: FLOYD CARTER on October 28, 2017, 12:06:40 PM
Post by: Allan Perret on October 30, 2017, 07:26:31 AM
What is this "2K" ? I have used auto clear coat (2-part), but never heard of 2K.2K is just another name / label for 2-part.
Post by: Dan McEntee on October 30, 2017, 09:21:17 PM
What is this "2K" ? I have used auto clear coat (2-part), but never heard of 2K.
2K is what Spray Max calls their two part urethane paints. I have never seen two part paints referred to this way any place else. It just got picked up as part of the forum vernacular.
Type at you later,
Dan McEntee
Post by: Avaiojet on October 30, 2017, 10:24:06 PM