stunthanger.com

General control line discussion => Open Forum => Topic started by: Peter Deane on July 21, 2006, 01:41:43 PM

Title: 10 " 3 blader for a Magnum 36??
Post by: Peter Deane on July 21, 2006, 01:41:43 PM

Greetings all;

I'm looking for recommendations on a 3blade CF prop for a magnum 36 (unpiped) in a classic stunt design (originally with a fox35 on a 10x6) - The ground clearance limits prop diameter to 10" and the magnum runs an 11x4 for 2 blade operation- any suggestions on what I should do here? It seems that bolly has a 10x5.75 3 blade - would need significant rework with hot water and a prop gauge - are there any off the shelf solutions out there??

Thanks in advance

Peter

Title: Re: 10 " 3 blader for a Magnum 36??
Post by: peabody on July 21, 2006, 02:21:41 PM

Rnady Smith can provide a Bolly c/f 10 X 4...a good place to start...

Title: Re: 10 " 3 blader for a Magnum 36??
Post by: Peter Deane on July 21, 2006, 02:46:19 PM

Hey Thanks- I did just see a 11x4 3 blader which should cut down just fine- time to order some.

Cheers

Peter