stunthanger.com

General control line discussion => Open Forum => Topic started by: kevin king on May 25, 2023, 04:59:17 PM

Title: #1 size screws
Post by: kevin king on May 25, 2023, 04:59:17 PM

Does anyone have a source for the small #1 size screws that Sig had?  They had a head that sunk in flush to a counter sunk hole. The ones we used to hold the aluminum engine mounting pads to the motor mounts.

Title: Re: #1 size screws
Post by: Brett Buck on May 25, 2023, 05:46:26 PM

Quote from: kevin king on May 25, 2023, 04:59:17 PM

Does anyone have a source for the small #1 size screws that Sig had?  They had a head that sunk in flush to a counter sunk hole. The ones we used to hold the aluminum engine mounting pads to the motor mounts.

   You mean, #1 machine screws?:

https://www.mcmaster.com/products/screws/thread-size~1-72/18-8-stainless-steel-slotted-flat-head-screws-10/

    But I just glue the pads on.

     Brett

Title: Re: #1 size screws
Post by: John Rist on May 25, 2023, 05:48:00 PM

https://www.mcmaster.com/products/screws/system-of-measurement~inch/thread-size~1-64/

What
Brett said

Title: Re: #1 size screws
Post by: kevin king on May 25, 2023, 06:37:03 PM

Thanks guys.

Title: Re: #1 size screws
Post by: john e. holliday on May 25, 2023, 09:59:36 PM

Also try RTL Fasteners.  I know he has some flat head screws. D>K