stunthanger.com

General control line discussion => Open Forum => Topic started by: Joe Mader on July 19, 2006, 10:26:15 AM

Title: 1 1/4" Spinner
Post by: Joe Mader on July 19, 2006, 10:26:15 AM
Does anyone know where you can find a 1 1/4" spinner?

Thanks
Title: Re: 1 1/4" Spinner
Post by: Busby on July 19, 2006, 10:53:10 AM
Tru turn now makes one, or they said they were putting one in production as of last years Toledo show.
It should be in production by this point.
Title: Re: 1 1/4" Spinner
Post by: Jay on July 19, 2006, 11:53:08 AM
http://www.truturn.com/Spinners/By_Diameter/by_diameter.html

Nothing listed yet.

Brodak had one at the Toledo show as well.  Said he was going to be listing them soon.  No word yet but I am waiting for my contact to let me know.

Jay
Title: Re: 1 1/4" Spinner
Post by: Ron Merrill on July 19, 2006, 12:13:58 PM
TRY T&L Specialties. Tom Lay owner. thelayster@aol.com. j1
Title: Re: 1 1/4" Spinner
Post by: Wynn Robins on July 19, 2006, 08:57:43 PM
and what are you after that for Joe??
Title: Re: 1 1/4" Spinner
Post by: Warren Leadbeatter on July 24, 2006, 03:01:37 AM
Hi

I think he might have been looking for one for me!  I have recently built a Brodak 1/2A Pathfinder which calls for a 1 1/4" Prop spinner on the plans.  I looked at the Brodak site and they make no mention of the Spinner and even the pic on the kit box doesn't have the spinner shown.

I eventually found one from a site that SS hobbies recommended (hobby-lobby.com), it's not 1 1/4 it's 1 3/16" for electric but thats near enough, I'll make it fit.

Cheers
Title: Re: 1 1/4" Spinner
Post by: frank carlisle on July 24, 2006, 07:15:41 AM
Brodak has their new spinners now. The 1.25 spinner is listed at $10.99.
I'm pretty sure they are in stock.
1-724-966-2726 is the Brodak Hobby Shop phone number.
Title: Re: 1 1/4" Spinner
Post by: Bob Reeves on July 24, 2006, 04:30:59 PM
I haven't actually asked in a while but my understanding was the 1/4 inch sizes will come in with the Strega ARF's the 1/2 inch sizes are in stock now.