stunthanger.com

General control line discussion => Open Forum => Topic started by: Peter Germann on April 05, 2018, 04:58:24 AM

Title: "My Way" Construction Pictures
Post by: Peter Germann on April 05, 2018, 04:58:24 AM

Here is a bit of added information

Title: Re: "My Way" Construction Pictures
Post by: ron young on April 05, 2018, 05:30:34 AM

Wow very very well done if only I could build like that .
Thanks for sharing
Ron

Title: Re: "My Way" Construction Pictures
Post by: Al Takatsch on April 05, 2018, 06:26:01 AM

Hi Peter,
What is your prefered way to connect pushrod to bellcrank?
What type of bellcrank do you use?

Nice work, love to see it fly.
Al T.

Title: Re: "My Way" Construction Pictures
Post by: Peter Germann on April 05, 2018, 08:26:22 AM

Bellcrank is made from two pieces of 1/16 in Epoxy printed circuit bord material. I have uploaded a drawing named "Steuerung" showing dimensions. All connections are commercial 3 mm  (1/8") ball-links, modified for minimum friction.

Title: Re: "My Way" Construction Pictures
Post by: Al Takatsch on April 05, 2018, 10:34:07 AM

 Thank you Peter,
What type of bellcrank bearing did you use or fabricate?
Al T.

Title: Re: "My Way" Construction Pictures
Post by: Peter Germann on April 05, 2018, 11:21:00 AM

1/8 piano wire shaft running in a brass tube 1/8 ID x 3/4 in long. Greased for life at time of installation.

Title: Re: "My Way" Construction Pictures
Post by: Vincent Judd on April 05, 2018, 01:41:48 PM

Beautiful job Peter, thanks for sharing photos and all design information, very interesting.

Vince