stunthanger.com

Vendors Corner => Okie Air Model Products => Topic started by: Motorman on March 15, 2020, 09:22:18 PM

Title: Complete ready-to-install ball link control system
Post by: Motorman on March 15, 2020, 09:22:18 PM

blank

Title: Re: Complete ready-to-install ball link control system
Post by: Fred Underwood on March 15, 2020, 09:54:09 PM

What is the bellcrank rotation each direction?  I can't tell from your description and don't know the hardware, so what is the pivot to hole distance at the elevator, and distance at the flap for pivot to elevator pushrod hole and pivot to bellcrank hole?

Sorry, I didn't notice this being posted in the vendor section when I posted.

Title: Re: Complete ready-to-install ball link control system
Post by: Russell Honea on March 16, 2020, 06:16:18 PM

Hi Motorman,

I spoke to Tom earlier and he told me the bellcrank drilled at 15/16 should provide about 30 degrees and at 1 inch should give you the 35 degrees you are looking for.

Russell