News:



  • December 13, 2024, 02:48:32 AM

Login with username, password and session length

Author Topic: Complete ready-to-install ball link control system  (Read 8754 times)

Offline Motorman

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 3537
Complete ready-to-install ball link control system
« on: March 15, 2020, 09:22:18 PM »
blank
« Last Edit: August 25, 2021, 11:27:21 AM by Motorman »

Offline Fred Underwood

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 825
Re: Complete ready-to-install ball link control system
« Reply #1 on: March 15, 2020, 09:54:09 PM »
What is the bellcrank rotation each direction?  I can't tell from your description and don't know the hardware, so what is the pivot to hole distance at the elevator, and distance at the flap for pivot to elevator pushrod hole and pivot to bellcrank hole?

Sorry, I didn't notice this being posted in the vendor section when I posted.
Fred
352575

Offline Russell Honea

  • Moderator
  • Trade Count: (0)
  • Ensign
  • *****
  • Posts: 38
Re: Complete ready-to-install ball link control system
« Reply #2 on: March 16, 2020, 06:16:18 PM »
Hi Motorman,

I spoke to Tom earlier and he told me the bellcrank drilled at 15/16 should provide about 30 degrees and at 1 inch should give you the 35 degrees you are looking for.

Russell


Advertise Here
Tags: