stunthanger.com
Vendors Corner => Mikey's models => Topic started by: MikeyPratt on March 19, 2014, 07:50:23 PM
-
Primary Force Plans:
This popular flapless design has earned an outstanding reputation not only as a competition stunt trainer, but also as an everyday sport flyer that is easy to build, easy to trim, and easy to fly. The feed back I've received form many modelers about its terrific performance and its presentation of the stunt pattern makes it a Force (pun intended) at any contest.
Plan: 36" X 46" Fully detailed with all the proper call outs and wood sizes.
Scratch Builders Sheet: All the required parts printed separately on the sheet. The individual part can be cut out from the (SBS) and pasted to the balsa and and/or plywood sheets. The parts can now be cut out with a scroll saw just to the outside of the line and finished to the line with a sanding block. Note: When cutting wing ribs, stack two balsa sheets together so you are cutting out ribs for each wing panel.
Instruction Book: Nine pages of step by step instructions to assemble the model plus, a Bench Trimming section, Engine and Prop section, and other helpful building tips along the way.
Price: $30.00 plus $5.00 shipping (US).
Mike Pratt
843 Driftwood Drive #7
St Cloud, MN 56303
-
Hey Mikey, old DOC here. My Primary Force that I picked up in Arizona some years ago is the best stunt plane I have. It has given me some good scores flying the pattern that the built up planes go lacking on. I should probably strip it down and recover after the demented poodle did her little dance on the wings. All I did was put some SLC over the torn covering. I still have the plans in the shop some where, but then again it would probably be easier and quicker to order a new set.
Anyway I noticed the Mikey's models while I was scrolling down thru the forum, don't know why I didn't see it sooner. Now do you take PayPal?
-
I hope the offer lasts long enough for me to scratch up the $$, I fell in love with it when Wayne Robinson brought his scratch built PForce out to the field last week. Just what I needed, to fall in love with another plane! ::)
Rusty
-
Hi Rusty,
Yea, I know what you mean!!! Happens all the time to me (LOL).
Later,
Mikey
-
Greetings!
Is this still the current info to order a set of Primary Force plans?
Thanks,
Todd
-
My address
Mike Pratt
843 Driftwood Drive #7
Saint Cloud, MN 56303
Like everything else things have gone up.
So drop me a line for current prices.
May the P-Force Be with you!!
I still have plans and instruction book
Plus a few short kits.