stunthanger.com

Vendors Corner => LEE MACHINE SHOP => Topic started by: Dennis Toth on August 16, 2011, 06:16:02 PM

Title: Pilot drill for prop holes to enlarge to 5mm
Post by: Dennis Toth on August 16, 2011, 06:16:02 PM

Jim,
I was wondering if you have or could make a prop drill that had a 1/4" pilot stud with a drill around it to allow enlarging the hole to 5mm?

Thanks,              DennisT

Title: Re: Pilot drill for prop holes to enlarge to 5mm
Post by: BillLee on August 16, 2011, 06:31:39 PM

Not Jim, but I have to ask: how will you drill a hole to enlarge from 1/4" to 5mm since 5mm is smaller than 1/4"?

Bill

Title: Re: Pilot drill for prop holes to enlarge to 5mm
Post by: James Lee on August 17, 2011, 07:58:08 PM

Dennis
I am not set up to do drill bits....    A pilot could be cut in the end, but I'm a bit leery of that....   Those drill bits can be 'bit' hard!
Jim