News:



Advertise Here

  • October 25, 2021, 11:58:14 PM

Login with username, password and session length

Author Topic: General comments  (Read 8352 times)

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 559
General comments
« on: December 01, 2006, 12:53:50 PM »
Hi everyone!!
I am not a computer geek so bear with me on that point!!
I do appreciate the nice comments, I try to do a good job for a reasonable price.  Mark's project was a bit interesting...  And I'm really happy that he has a good running motor.
There are a couple of items I'm thinking of doing for LMS...  One is a tool that would hold a piece of sandpaper with a  hole in the middle that would slide over the prop shaft so that the nose ring could be sanded flat and true to the engine shaft...   Comments?
And a general note...   I do have a real job (durn!! )  so phone in the evenings or email is best.  thanks for all your support!!  And a big Thanks to Sparky for all his help!!!
Jim Lee    ;D

For a list click here  http://www.stunthanger.com/lee_machine_shop.htm
« Last Edit: December 02, 2006, 01:51:43 PM by Robert Storick »

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12785
  • Second in COMMAND
Re: General comments
« Reply #1 on: December 01, 2006, 11:39:42 PM »
Hi Jim,

I have made several "nose ring sanders" that fit over the shaft (I lose them sometimes! hahaha).  If you would like, I can send you a picture to compare with your idea.

It's very simple, and allows the depth of "cut" to go as much as 1/8th".

Bill <><

Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline RC Storick

  • Forum owner
  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12231
  • The finish starts with the first piece of wood cut
    • Stunt Hangar
Re: General comments
« Reply #2 on: December 02, 2006, 01:56:16 PM »
I have bought many products from Lee I even got him to start making his line wrapping tool again. Well worth it! Fastest way to wrap line's bar none!! I have assortment of his ball drivers and finger drills. These are must haves! Good luck we can only hope to promote your control line business until your a millionaire. God only knows I'm getting rich!  **)
« Last Edit: January 01, 2007, 04:10:13 PM by Robert Storick »
AMA 12366

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 559
Re: General comments
« Reply #3 on: December 02, 2006, 08:44:25 PM »
Sparky
I'll probably make my million right after you!!  **)
Jim

Offline john e. holliday

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 21851
Re: General comments
« Reply #4 on: December 05, 2006, 08:45:54 AM »
To both Jim and Sparky,  I have already spent my first million several years ago and have been working on the second million since.  DOC Holliday
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Offline Bootlegger

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2719
Re: General comments
« Reply #5 on: December 31, 2006, 04:12:58 PM »

 Jim, I would like to see a picture of your line wrapping tool. I ;ooked at the one on your web page, but couldn't see enough to understand how it works.
  Thanks a lot, Gil AKA Bootlegger
 Oh, Sparky thanks for this web site    Happy and Safe New Year to everyone......
8th Air Force Veteran
Gil Causey
AMA# 6964

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 559
Re: General comments
« Reply #6 on: December 31, 2006, 08:27:02 PM »
I think this will work....   I hope to post more product pictures in the vendors space in a couple of weeks
Thanks   ;D
Jim

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 559
Re: General comments
« Reply #7 on: March 02, 2009, 10:48:11 AM »
The prop scribe...
Hubs available in a variety of sizes.


Advertise Here
Tags:
 


Advertise Here