Vendors Corner > LEE MACHINE SHOP
General comments
James Lee:
Hi everyone!!
I am not a computer geek so bear with me on that point!!
I do appreciate the nice comments, I try to do a good job for a reasonable price. Mark's project was a bit interesting... And I'm really happy that he has a good running motor.
There are a couple of items I'm thinking of doing for LMS... One is a tool that would hold a piece of sandpaper with a hole in the middle that would slide over the prop shaft so that the nose ring could be sanded flat and true to the engine shaft... Comments?
And a general note... I do have a real job (durn!! ) so phone in the evenings or email is best. thanks for all your support!! And a big Thanks to Sparky for all his help!!!
Jim Lee ;D
For a list click here http://www.stunthanger.com/lee_machine_shop.htm
Bill Little:
Hi Jim,
I have made several "nose ring sanders" that fit over the shaft (I lose them sometimes! hahaha). If you would like, I can send you a picture to compare with your idea.
It's very simple, and allows the depth of "cut" to go as much as 1/8th".
Bill <><
RC Storick:
I have bought many products from Lee I even got him to start making his line wrapping tool again. Well worth it! Fastest way to wrap line's bar none!! I have assortment of his ball drivers and finger drills. These are must haves! Good luck we can only hope to promote your control line business until your a millionaire. God only knows I'm getting rich! **)
James Lee:
Sparky
I'll probably make my million right after you!! **)
Jim
john e. holliday:
To both Jim and Sparky, I have already spent my first million several years ago and have been working on the second million since. DOC Holliday
Navigation
[0] Message Index
[#] Next page
Go to full version