stunthanger.com

Vendors Corner => LEE MACHINE SHOP => Topic started by: James Lee on December 01, 2006, 12:53:50 PM

Title: General comments
Post by: James Lee on December 01, 2006, 12:53:50 PM

Hi everyone!!
I am not a computer geek so bear with me on that point!!
I do appreciate the nice comments, I try to do a good job for a reasonable price.  Mark's project was a bit interesting...  And I'm really happy that he has a good running motor.
There are a couple of items I'm thinking of doing for LMS...  One is a tool that would hold a piece of sandpaper with a  hole in the middle that would slide over the prop shaft so that the nose ring could be sanded flat and true to the engine shaft...   Comments?
And a general note...   I do have a real job (durn!! )  so phone in the evenings or email is best.  thanks for all your support!!  And a big Thanks to Sparky for all his help!!!
Jim Lee    ;D

For a list click here  http://www.stunthanger.com/lee_machine_shop.htm

Title: Re: General comments
Post by: Bill Little on December 01, 2006, 11:39:42 PM

Hi Jim,

I have made several "nose ring sanders" that fit over the shaft (I lose them sometimes! hahaha).  If you would like, I can send you a picture to compare with your idea.

It's very simple, and allows the depth of "cut" to go as much as 1/8th".

Bill <><

Title: Re: General comments
Post by: RC Storick on December 02, 2006, 01:56:16 PM

I have bought many products from Lee I even got him to start making his line wrapping tool again. Well worth it! Fastest way to wrap line's bar none!! I have assortment of his ball drivers and finger drills. These are must haves! Good luck we can only hope to promote your control line business until your a millionaire. God only knows I'm getting rich!  **)

Title: Re: General comments
Post by: James Lee on December 02, 2006, 08:44:25 PM

Sparky
I'll probably make my million right after you!!  **)
Jim

Title: Re: General comments
Post by: john e. holliday on December 05, 2006, 08:45:54 AM

To both Jim and Sparky,  I have already spent my first million several years ago and have been working on the second million since.  DOC Holliday

Title: Re: General comments
Post by: Bootlegger on December 31, 2006, 04:12:58 PM

 Jim, I would like to see a picture of your line wrapping tool. I ;ooked at the one on your web page, but couldn't see enough to understand how it works.
  Thanks a lot, Gil AKA Bootlegger
 Oh, Sparky thanks for this web site    Happy and Safe New Year to everyone......

Title: Re: General comments
Post by: James Lee on December 31, 2006, 08:27:02 PM

I think this will work....   I hope to post more product pictures in the vendors space in a couple of weeks
Thanks   ;D
Jim

Title: Re: General comments
Post by: James Lee on March 02, 2009, 10:48:11 AM

The prop scribe...
Hubs available in a variety of sizes.