News:
2018----><---- T Shirt




  • December 16, 2018, 11:52:17 AM

Login with username, password and session length

Author Topic: Fillet tools now available  (Read 1092 times)

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Fillet tools now available
« on: February 24, 2018, 01:07:52 PM »
Just in time for VSC are these new fillet tools.    Chrome ball bearings make a perfect radius for that front row fillet.
Chrome ball glued to a handle that is 1/8" less in diameter than the ball.  This enables the tool to go around the corners and maintain a perfect radius.
Available in 1/2", 5/8" and 3/4" for $3 ea and 7/8" and 1" for $4 each.
See us at VSC and check these out!!    ;D ;D ;D
Thanks
Jim


Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Re: Fillet tools now available
« Reply #1 on: February 24, 2018, 01:24:42 PM »
How about some pictures...

Offline Sean McEntee

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 738
Re: Fillet tools now available
« Reply #2 on: February 24, 2018, 04:22:41 PM »
 ;D

Offline Dennis Toth

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2121
Re: Fillet tools now available
« Reply #3 on: March 03, 2018, 01:41:43 PM »
Jim,
We need two more smaller sizes 3/8" and 1/4" that should cover Old Time, Classic and PA ships.

Best,   DennisT

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Re: Fillet tools now available
« Reply #4 on: March 04, 2018, 10:33:35 AM »
Dennis
That is a possibility....   Watch this space!!
Thanks
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1354
  • Commander Billy Mitchell Senior Squadron, CAP
Re: Fillet tools now available
« Reply #5 on: April 09, 2018, 08:53:12 AM »
Jim I have been using the tip of my finger for so long that I dont know which are to more common sizes.  What do you think?  Mike.
"If you really want to do something, you will find a way.  If you don't, you'll find an excuse."

Jim Rohn

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Re: Fillet tools now available
« Reply #6 on: April 09, 2018, 10:27:03 AM »
Mike
I think the 1/4", 3/8 and 1/2" will be the most used for wing, stab joints....   There may be other places that a more generous curve may be desired...
The best part about these is that they can be used at almost any angle.  Much easier to get around the LE of a wing....
Thanks
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1354
  • Commander Billy Mitchell Senior Squadron, CAP
Re: Fillet tools now available
« Reply #7 on: April 09, 2018, 06:12:14 PM »
Thank you Jim.   I will go to the web site and put together an order for you.

Mike
"If you really want to do something, you will find a way.  If you don't, you'll find an excuse."

Jim Rohn

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1354
  • Commander Billy Mitchell Senior Squadron, CAP
Re: Fillet tools now available
« Reply #8 on: April 10, 2018, 03:39:36 PM »
Jim how much do I need to send you for one each of 1/4", 3/8" and 1/2"  fillet ball bearing tool.  I can probably just paypal it.   Thanks Mike

"If you really want to do something, you will find a way.  If you don't, you'll find an excuse."

Jim Rohn

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Re: Fillet tools now available
« Reply #9 on: April 10, 2018, 09:05:02 PM »
Mike
Check your email.
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1354
  • Commander Billy Mitchell Senior Squadron, CAP
Re: Fillet tools now available
« Reply #10 on: April 10, 2018, 09:42:06 PM »
Jim you may have had an old e mail of mine because there is nothing there.  Here is my e mail that I use now.   mikegriffin1947@gmail.com.   Sorry if you had an old address for me.  Try that one and I should get it OK.

Mike
"If you really want to do something, you will find a way.  If you don't, you'll find an excuse."

Jim Rohn

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Re: Fillet tools now available
« Reply #11 on: April 10, 2018, 10:07:07 PM »
Mike
Updated email may work better!
Thanks
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1354
  • Commander Billy Mitchell Senior Squadron, CAP
Re: Fillet tools now available
« Reply #12 on: April 12, 2018, 08:21:16 AM »
Jim just sent you a PayPal payment for the set of 4 small fillet tools.  Let me know if that was the correct amount and that you got it OK.  Thank you.

Mike
"If you really want to do something, you will find a way.  If you don't, you'll find an excuse."

Jim Rohn

Offline James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 479
Re: Fillet tools now available
« Reply #13 on: April 15, 2018, 08:41:40 PM »
Mike
Money here and tools are on the way
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1354
  • Commander Billy Mitchell Senior Squadron, CAP
Re: Fillet tools now available
« Reply #14 on: April 16, 2018, 10:16:57 PM »
Jim i got the fillet tools today.  They are great workmanship as all your tools are.  Thank you for the great service.

Mike
"If you really want to do something, you will find a way.  If you don't, you'll find an excuse."

Jim Rohn


Tags: