News:


  • March 28, 2024, 05:21:57 PM

Login with username, password and session length

Author Topic: Fillet tools now available  (Read 3367 times)

Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Fillet tools now available
« on: February 24, 2018, 01:07:52 PM »
Just in time for VSC are these new fillet tools.    Chrome ball bearings make a perfect radius for that front row fillet.
Chrome ball glued to a handle that is 1/8" less in diameter than the ball.  This enables the tool to go around the corners and maintain a perfect radius.
Available in 1/2", 5/8" and 3/4" for $3 ea and 7/8" and 1" for $4 each.
See us at VSC and check these out!!    ;D ;D ;D
Thanks
Jim

Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Re: Fillet tools now available
« Reply #1 on: February 24, 2018, 01:24:42 PM »
How about some pictures...

Offline Sean McEntee

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 873
Re: Fillet tools now available
« Reply #2 on: February 24, 2018, 04:22:41 PM »
 ;D

Offline Dennis Toth

  • 2020 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 4209
Re: Fillet tools now available
« Reply #3 on: March 03, 2018, 01:41:43 PM »
Jim,
We need two more smaller sizes 3/8" and 1/4" that should cover Old Time, Classic and PA ships.

Best,   DennisT

Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Re: Fillet tools now available
« Reply #4 on: March 04, 2018, 10:33:35 AM »
Dennis
That is a possibility....   Watch this space!!
Thanks
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Fillet tools now available
« Reply #5 on: April 09, 2018, 08:53:12 AM »
Jim I have been using the tip of my finger for so long that I dont know which are to more common sizes.  What do you think?  Mike.

Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Re: Fillet tools now available
« Reply #6 on: April 09, 2018, 10:27:03 AM »
Mike
I think the 1/4", 3/8 and 1/2" will be the most used for wing, stab joints....   There may be other places that a more generous curve may be desired...
The best part about these is that they can be used at almost any angle.  Much easier to get around the LE of a wing....
Thanks
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Fillet tools now available
« Reply #7 on: April 09, 2018, 06:12:14 PM »
Thank you Jim.   I will go to the web site and put together an order for you.

Mike

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Fillet tools now available
« Reply #8 on: April 10, 2018, 03:39:36 PM »
Jim how much do I need to send you for one each of 1/4", 3/8" and 1/2"  fillet ball bearing tool.  I can probably just paypal it.   Thanks Mike


Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Re: Fillet tools now available
« Reply #9 on: April 10, 2018, 09:05:02 PM »
Mike
Check your email.
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Fillet tools now available
« Reply #10 on: April 10, 2018, 09:42:06 PM »
Jim you may have had an old e mail of mine because there is nothing there.  Here is my e mail that I use now.   mikegriffin1947@gmail.com.   Sorry if you had an old address for me.  Try that one and I should get it OK.

Mike

Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Re: Fillet tools now available
« Reply #11 on: April 10, 2018, 10:07:07 PM »
Mike
Updated email may work better!
Thanks
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Fillet tools now available
« Reply #12 on: April 12, 2018, 08:21:16 AM »
Jim just sent you a PayPal payment for the set of 4 small fillet tools.  Let me know if that was the correct amount and that you got it OK.  Thank you.

Mike

Online James Lee

  • Moderator
  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 611
Re: Fillet tools now available
« Reply #13 on: April 15, 2018, 08:41:40 PM »
Mike
Money here and tools are on the way
Jim

Offline Mike Griffin

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2754
Re: Fillet tools now available
« Reply #14 on: April 16, 2018, 10:16:57 PM »
Jim i got the fillet tools today.  They are great workmanship as all your tools are.  Thank you for the great service.

Mike


Advertise Here
Tags:
 


Advertise Here