stunthanger.com
Vendors Corner => LEE MACHINE SHOP => Topic started by: James Lee on February 24, 2018, 01:07:52 PM
-
Just in time for VSC are these new fillet tools. Chrome ball bearings make a perfect radius for that front row fillet.
Chrome ball glued to a handle that is 1/8" less in diameter than the ball. This enables the tool to go around the corners and maintain a perfect radius.
Available in 1/2", 5/8" and 3/4" for $3 ea and 7/8" and 1" for $4 each.
See us at VSC and check these out!! ;D ;D ;D
Thanks
Jim
-
How about some pictures...
-
;D
-
Jim,
We need two more smaller sizes 3/8" and 1/4" that should cover Old Time, Classic and PA ships.
Best, DennisT
-
Dennis
That is a possibility.... Watch this space!!
Thanks
Jim
-
Jim I have been using the tip of my finger for so long that I dont know which are to more common sizes. What do you think? Mike.
-
Mike
I think the 1/4", 3/8 and 1/2" will be the most used for wing, stab joints.... There may be other places that a more generous curve may be desired...
The best part about these is that they can be used at almost any angle. Much easier to get around the LE of a wing....
Thanks
Jim
-
Thank you Jim. I will go to the web site and put together an order for you.
Mike
-
Jim how much do I need to send you for one each of 1/4", 3/8" and 1/2" fillet ball bearing tool. I can probably just paypal it. Thanks Mike
-
Mike
Check your email.
Jim
-
Jim you may have had an old e mail of mine because there is nothing there. Here is my e mail that I use now. mikegriffin1947@gmail.com. Sorry if you had an old address for me. Try that one and I should get it OK.
Mike
-
Mike
Updated email may work better!
Thanks
Jim
-
Jim just sent you a PayPal payment for the set of 4 small fillet tools. Let me know if that was the correct amount and that you got it OK. Thank you.
Mike
-
Mike
Money here and tools are on the way
Jim
-
Jim i got the fillet tools today. They are great workmanship as all your tools are. Thank you for the great service.
Mike