stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: Alan Hahn on October 04, 2007, 02:15:46 AM

Title: Ztron timer question
Post by: Alan Hahn on October 04, 2007, 02:15:46 AM

I was reading the Ztron manual and have a question. With my JMP-2 timers, I can hook a small nicad receiver battery to the retracts pin, and a servo to the ESC pin and test the particular throttle and timer settings---all without actually worrying about a whirling prop.

It sure looks like to me that I can do the same thing with the Ztron, although the instructions don't mention it. Typically in a RC system, the ground and power leads are bussed directly through every servo (on the same two adjacen pins), so in principle, you can attach the battery to any channel and have it power the whole system. I am guessing this is true for the ztron, but don't want to blow another timer.

So the question is, can I do this?

Title: Re: Ztron timer question
Post by: Dean Pappas on October 04, 2007, 08:32:33 AM

Yes.
all the best,
    Dean P.