So a while back I mentioned that I wanted to build a one-off design for ECL using the Mike Palko Silencer wing. Well, I've done just that; it is not fully finished yet, but it is now to a point where I can confidently show a bit of it off. A few notes on the Plane, The Silencer wing minus tips was 50" across and each of my tips is 2" so it has a 54" span, I don't have the area just yet. The planned power system is a Cobra 2826-10 970kv Brushless outrunner, a Cobra 45a speed controller, and a Turnigy Nano-Tech 4s 3300mAh Lipo. The idea behind the aesthetics of the plane is that I wanted it to look similar to something like an Ares or Airon or Starlight, narrow fuselage, sleek lines, kind of a diversion from my perception of modern stunt ships. It has tip Fins because I think they're cool, and my nose moment is Shortened by almost 2 inches. The wing was built in a Bob Hunt Lost Foam fixture, as a side note, if you haven't tried this wing building method, much like I hadn't, it is by far the nicest way to build a wing I've ever used. The battery will go Directly beneath the motor. So this is it so far, I hope to have it done by May before my wedding. It wont be at Brodak's this year, because I wont be at Brodak's this year, but I hope to have it going Philly Fliers in July. Anyway let me know what you think.