stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: John Rist on August 31, 2011, 08:57:01 AM
-
I am currently running a Turnigy 3548-900 in my scale LA5. It swings a APC 11 x 5.5 EP at 10,000 rpm on a 4 cell Li-Po pack. It burns about 1600 out of the 3000 mah pack for a normal scale flight. I would like to upgrade it to a AXI motor. What would be the appropriate AXI PN to replace this motor?
-
AXI 2826-10 (Kv = 920) is the usual 4cell AXI for stunt.
-
1600 out of 3000, or 2600 out of 3000? If you're really using just 1600mAh, and you're not using the battery for balance, you can go to a lower capacity pack and lose some weight.
Get an AXI with a similar average power rating as the Turnigy, a similar weight, and a Kv of 900 or better (without looking at catalogs, that AXI 2826-10 may very likely going to deliver the goods).
-
1600 out of 3000, or 2600 out of 3000? If you're really using just 1600mAh, and you're not using the battery for balance, you can go to a lower capacity pack and lose some weight.
Get an AXI with a similar average power rating as the Turnigy, a similar weight, and a Kv of 900 or better (without looking at catalogs, that AXI 2826-10 may very likely going to deliver the goods).
I need the extra weight for balance. Scale aircraft tend to be tail heavy (short noises big tailes).