Hi David,
Have you ever had problems with your EagleTree equipment?
I have the eLogger and the RPM sensor that I have tried to use to measure the in-flight parameters.
At that time, I was using Cobra 2820/12, Cobra 40+ Amps. ESC, 4S 3000 mAh LiPo and the KR Governor.
I have connected everything correctly and started flying but, only after 15 seconds, the motor stopped. I was lucky....the plane was flying the wheels down and I safely landed. The Eagle Tree people blabbered some explanation that did not make sense at all and stayed mute despite my multiple emails.
I have tried using the eLogger for the ground tests with my current installation: MVVS 8.0 Kv=680, 6S ThunderPower 2800 mAh battery, Spin66 ESC and the active timer from Igor Burger. The motor stopped after 2 seconds that, in my opinion, indicates the conflict between the eLogger and Spin66 ESC and/ or active timer.
The issue remains unsolved as nobody knows why this happened (including Igor).
It is imperative for me to know WHY the motor stopped. It would be extremely useful for everybody flying stunt to measure the current variations during pattern so the question remaining is HOW TO DO IT?
Happy Flying,
M