stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: Pat Johnston on February 13, 2017, 09:41:29 AM
-
I just finished up the ACAD work which combined on one sheet three electric conversion kits for profile models. The first one is for an equivalent 25-35 power package such as on the Shark 402. The second is for a 35-40 setup such as on the Magician. The third is for a 40-46 setup such as on my Shark 560. These three cover the ranges of 400, 500 and 560 inch planes. I can make larger ones if needed, but this covers the bread and butter of most profile setups. I'll attach a PDF file so you can gander what it looks like. The setup is clean and relatively slim. It uses a Hacker 15 X-mount to keep it slim. I cut four layers of 1/32" plywood and laminate it together to make up the X-mount. This is a lighter mount but plenty strong enough for our purposes. As a Crass Comercial message I sell the whole setup for $15 plus $2 postage. All parts are laser cut and an instruction sheet is included. I have been excited to install these on my planes and am having a ball doing the electric thing.
Pat Johnston
Electric Development Division
Skunk Works
-
Hi Pat-
Do you still have a source to buy the CC Talon 35's from?
Thanks in advance.
Chris
-
I haven't looked at the CC site for a little while. Brodak sells a 40A unit, also. Could be a reasonable replacement. Anyone?
Pat Johnston
Skunk Works
-
I went into Castle Creations site and the Talon 35 is available for $47.60. If you want one suitable for a 25 sized plane (like a Ringmaster) the Talon 25 is good at $38.26. The Talon 25 is less expensive and .35 ounces lighter. Good bargain.
Pat Johnston
Skunk Works
-
Thanks Pat for checking!