It is 11:30 and I am back from the shop today I worked more than the usual I stayed from 9:45 to 11:30 a whole 2 hours. I only work after we put Alex to bed  .
So far I am putting the final finish on the wing and fuse molds. Also I am sanding the flaps and top fuse structure molds whitch are made of aluminum. It is a lot of work and not much time. I am sure it could fly in a month or two. I think I have zeroed in on the Sultan setup for power with the addition of a cooling fan on the motor. 

Dorin is Ok project on temporary hold . Should be up and going again soon.

I am OK the family is OK. Speaking of which Alex is 9 months old now 30 in tall and 22lb healthy and happy. I am very busy stating something new. Soon I will get back to it.
Thanks

I have been busy with another project and now I am ready to start pecking at his project.
Adventures in balsa forming
Well I started to form the balsa in the vaccum bag but I believe you nee a bit of heat to dry it in vaccum so I ended up with the piece formed but not dried. OK back to plan B. I put a napkin on top of it and on the top of the napkin I put some sh...... ,well it is not sh.... it is sand, to hold it down in place I hop it is dry tomorrow.