stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: Andrew Borgogna on November 07, 2011, 09:26:37 AM

Title: question about Hanger 9 incidence meter
Post by: Andrew Borgogna on November 07, 2011, 09:26:37 AM

I have a Hanger 9 digital incidence meter.  I have long since lost the instructions that came with it and maybe somebody out there can answer my question.  The second button down from the top is labeled "Acquire" does anybody know what that means?  The top button is labeled "Hold" and the bottom is an on/off switch.  The reason I am asking is I do not get good readings (compared to my gravity incidence meter) unless I press the "Acquire" button then the two meters seem to match.  I don't remember having to do that before.  If I don' press "Acquire" the beam is visually not level when  it reads "0" degrees incidence.  Any help is greatly appreciated.
Andy

Title: Re: question about Hanger 9 incidence meter
Post by: Mark Scarborough on November 07, 2011, 09:31:32 AM

Andrew,
sometimes a quick search on Google will save some grief.
I did a search for "hanger nine incidence meter" which lead me to a page about the meter, then on there under resources was a link for the manual,,

http://www.hangar-9.com/ProdInfo/Files/HAN192_Angle_Pro_Manual.pdf


bet this will help you out...
a quick review of the document says the aquire button sets zero,,
good luck,,

Title: Re: question about Hanger 9 incidence meter
Post by: Andrew Borgogna on November 07, 2011, 09:42:54 AM

Oh do I feel dumb ~^  Thank you for your help it answered all my questions.  I really do know how to use Google, it just never occured to me.  Dumb, dumb, dumb! mw~
Andy

Title: Re: question about Hanger 9 incidence meter
Post by: Mark Scarborough on November 07, 2011, 10:11:04 AM

Andrew,,,
yeah trust me,, I forget too,,
have no fear,, Steve Helmick is always there to remind me,,
Glad I found it for you,, LOL
enjoy