stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: John Witt on September 26, 2009, 11:50:52 AM

Title: Programming the Ztron timer
Post by: John Witt on September 26, 2009, 11:50:52 AM

Can anyone post, or send to me a copy of the programming instructions for the Ztron CL timer that has the pushbutton for entering program features. This is not the timer that has a pot on it.  The instructions posted on Windy's site and other places are not correct for this timer.

I have one page of the intructions, but appear to have lost the other one in my neatly organized workshop. How could this happen? ~^

In particular I need to know the time increment for the start delay, per increment of the binary sum; i.e.; for duration it is 10 sec per unit, is it the same for the start delay, so that 1=10sec, 2=20sec, etc.?

Thanks,

John

Title: Re: Programming the Ztron timer
Post by: Alan Hahn on September 26, 2009, 05:52:08 PM

I think this is it---the Ztron-3

Title: Re: Programming the Ztron timer
Post by: John Witt on September 26, 2009, 09:09:06 PM

Perfect, Alan, many thanks.  Going flying in the morning, and I want to do a bit more tinkering -- naturally. I fixed a control linkage glitch, so there will be a bit more trimming to do.

John