stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: John Rist on May 31, 2012, 01:44:26 AM

Title: Profile electric motor mounts
Post by: John Rist on May 31, 2012, 01:44:26 AM

Looking through the electric postings I see many examples of mounting motors on a profile ship with the use of right angle aluminum mounting brackets.  Does anyone make and sell these brackets?

Title: Re: Profile electric motor mounts
Post by: William DeMauro on May 31, 2012, 02:58:34 AM

John,
 I use 1/16 thick aluminum angle iron that I buy in Home Depot for a few dollars for a 3 foot length for the profiles that I make. I cut to size and drill.
William

Title: Re: Profile electric motor mounts
Post by: John Rist on May 31, 2012, 06:52:52 AM

Quote from: William DeMauro on May 31, 2012, 02:58:34 AM

John,
 I use 1/16 thick aluminum angle iron that I buy in Home Depot for a few dollars for a 3 foot length for the profiles that I make. I cut to size and drill.
William

YES - OK!!!  Now why didn't I think of that.   As an extrusion it should be hard and rigid.   y1   H^^

Title: Re: Profile electric motor mounts
Post by: builditright on June 09, 2012, 03:39:14 AM

John

I realize Lee hasn't finished this project yet but check out his post
on the E-mount setup I made for the Banshee he's converting to Electric.

http://stunthanger.com/smf/index.php?topic=23682.msg227802#msg227802

(http://stunthanger.com/smf/index.php?action=dlattach;topic=23682.0;attach=91420;image)