Electric Stunt > Gettin all AMP'ed up!

Predator Prototype

<< < (8/8)

builditright:
More Pics..

builditright:
Okay now prepare to cut the bottom sheeting out for the gear block openings.

First I cut out the gear doors on the plan and then turned the plan upside down and then placed the cut plan piece over the wing.
If you are not comfortable with working on the back side of the plan then make a mark the back side which panel you're working with.
Either way mark the sheeting through the cut out/opening in the sheet and then carefully start cutting the gear door openings starting in the middle of the box as shown.

builditright:
Wingtips are next.. I am starting with the outboard first and will also just show it first for clarity and less confusion.

I am adding some thin ply centers to the prototypes wingtip and would really appreciate some feedback on whether
this would be a welcomed add-on to the kit since it is not already a part of the kit.

Dave Heinzman:

 Walter, thanks for doing this kit, should be a winner!  If the thin plywood is 1/32" that would be good. I like it. At 1/16" ply maybe not so much. Plenty of holes though, either way would work out Ok.

Dave

Navigation

[0] Message Index

[*] Previous page