stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: Brent Williams on December 11, 2018, 03:32:33 PM
-
So here is a question to those that are using a Powerlab 8 charger, 2x HP DPS-600PB server power supplies, and a MPA 6 position paraboard.
- What are you guys using for a carrying case to house your charging gear? I need to build, buy or modify something that will work for this purpose.
-
I used a small Pelican case and a shoe horn to get everything in. See below about midway down.
https://stunthanger.com/smf/gettin-all-amp'ed-up!/power-supplies/
There are a lot of examples in the RC forums to look at, then DIY for fun.
IIRC, I used a Pelican Storm 2100 and there is now a Harbor Freight case a little larger and a more reasonable price. I didn't look closely at them, but HF has the Apache line.
https://www.harborfreight.com/3800-weatherproof-protective-case-16-516-in-63927.html
-
Many of the guys on RC Groups are using a Ridgid tool case, available at Home Depot, with good results. I had a Pelican case laying around so that’s what I used.
-
Here's mine. Pelican case with 2, 12v - 72 Amp power supplies wired in series for 24 volt output. A bit heavy, but I often bring to the field for contests and hook up a charging station for participants.