All,
Finally finished my new Excitation profile with AXI 2820-8, A123 3s2p battery, CC 45, Ztron III timer. Ship is 54" span, 595 sq in, 57oz, 64ft 0.015 lines. Motor run after new CC 2.0 firmware download was 8600 (was 8800 with 1.5 version). First several trim flights had 5.3 lap with an APC-E 11.5x5 @ 8600rpm. Increased prop pitch to 5 3/4 and lap time came in at 5.0. Have to do a small flap tweak to level the wings, inside flap is a tad low causing roll out upright and in inverted. May increase lines to 66' since the ship is solid on the 64'.
The new firmware works fine, the brake was set for high. It slows prop but does not completely stop unit model is almost on the ground. Pic's below.
Best, Dennis