stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: linheart smith on February 21, 2013, 07:46:08 AM

Title: Need help with programing Jeti ESC with the Jetispin box.
Post by: linheart smith on February 21, 2013, 07:46:08 AM

I have purchased a Jeti Spin Pro 44 and the Jetibox to program it with.  Using the included manual and a instructional video on you tube (http://www.youtube.com/watch?v=8MTcKEKj6Dk) I am well on my way to understanding how to program my new ESC. 

Now comes the Snag.  Under parameter "operational mode" you should be able to select "aircraft".  However "aircraft" is not selectable.

Please help.

Thanks

Linheart

 

Title: Re: Need help with programing Jeti ESC with the Jetispin box.
Post by: Igor Burger on February 21, 2013, 07:53:12 AM

and what you see there? what are possibilities to choose from?

Title: Re: Need help with programing Jeti ESC with the Jetispin box.
Post by: linheart smith on February 21, 2013, 08:06:05 AM

Hello Igor,

Operational mode:

Normal
Fast Response
Constant RPM
Const RPM Auto


Linheart

Title: Re: Need help with programing Jeti ESC with the Jetispin box.
Post by: Igor Burger on February 21, 2013, 08:20:24 AM

aaa yes yes ... "PRO" version has "normal" instead of aircraft ... I think they show nonPRO version

here you can see whole menue:

http://www.jetimodel.cz/data_downloads/108/spin_pro_schema-de-en-cz-2012.pdf

Title: Re: Need help with programing Jeti ESC with the Jetispin box.
Post by: linheart smith on February 21, 2013, 08:33:10 AM

Igor<

Would you list the parameters you program your Jeti ESc?

Linheart

Title: Re: Need help with programing Jeti ESC with the Jetispin box.
Post by: Igor Burger on February 21, 2013, 08:39:36 AM

I do not use PRO version, I did not find good settings, but I can evening list parameters for normal version, but important points are:

barke: hard

heli 3D mode

number of poles and rpm from - to regarding prop and motor

sensitivity 1
and all time parameters are on FIX from 1,25 to 2,0 ms

Title: Re: Need help with programing Jeti ESC with the Jetispin box.
Post by: Igor Burger on February 21, 2013, 08:43:03 AM

I knew it is somewhere written:

http://www.netax.sk/hexoft/docu/iAccTimer_en.pdf

go to end and you will see spin nonPro paprameters