stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: jose modesto on August 03, 2013, 11:05:26 AM
-
My 2013 Nat's model
SI-PM Saturn Impact PM
model specs, Wing: Impact Foam wing and Flaps
Stab/Elev: Pattern Master 51 spec sheeted Foam
Fuse: My Impact vacuum bagged composite fuse
Electrics:motor Cobra 3520/14 700kv E flite 32
Controller: Castle ice 50
Timer Hubin
Batt: sky lipo 3000 Mah
model weight at home 70.5 Nat's 71.5
Model finished with dope,basecoat auto colors with acrylic lacquer top coat.
Nats story to come.
Jose Modesto
-
Add Photos
jose Modesto
-
add photos
-
I like it Jose.
Front mount motor. That is how I mount my motors. Two retrofits from IC so far but next one built from scratch will have front mount.
How do you like the Cobra? They have three bearings I think.
Linheart
-
Linheart. This model uses a Bob Hunt mount,the mount is attached to my Impact composite fuse. The front mount eliminated the need for a cowl.(firewall mount) so only one opening for fuse the battery hatch.
the cobra worked real well. I used the motor through first round. For second round I used the Eflite power 32
You should talk to Will Moore about his new plane?
Jose Modesto
-
Linheart. This model uses a Bob Hunt mount,the mount is attached to my Impact composite fuse. The front mount eliminated the need for a cowl.(firewall mount) so only one opening for fuse the battery hatch.
the cobra worked real well. I used the motor through first round. For second round I used the Eflite power 32
You should talk to Will Moore about his new plane?
Jose Modesto
How did you do? We had to leave early so I didn't get to watch any of the round. I know William and Kevin had a good week. Sorry to hear Sina crashed.
James