stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: paul winter on January 01, 2013, 03:19:03 PM

Title: my new twin early days
Post by: paul winter on January 01, 2013, 03:19:03 PM

hi all my twin looking good
early days
excuse the messy bench

Title: Re: my new twin early days
Post by: Randy Cuberly on January 01, 2013, 08:40:00 PM

Cool...1 battery or two?

What motors are planned?

Randy C.

Title: Re: my new twin early days
Post by: linheart smith on January 02, 2013, 04:36:54 AM

Randy,

Take a look at Paul's You Tube film describing his setup for twin electric.

http://www.youtube.com/watch?v=JXx0ZlSszEI&list=FLGK55auROGcIIzhFeDCupVA&index=1



Linheart

Title: Re: my new twin early days
Post by: Randy Cuberly on January 02, 2013, 08:37:11 AM

Thanks for the link Linheart.  Very informative video.

Randy Cuberly

Title: Re: my new twin early days
Post by: paul winter on January 03, 2013, 08:46:00 AM

model progressing nicely not sure about the fin yet
weight so far with all bits 63 ounces
the air intake on the front is for the battery and the esc,s under the wing it exits at the back of the wing

spec

wing ....Impact profile,foam cut by Bob Hunt covered by me in 1.5 mm balsa
fuz cardianl 92 diamensions

hard wear
battery ...hobby king 4s4400 one only
motors ...OS 3815-1000
props 10x6 apc electric
esc's Castle Creation Ice lite 50 amp two off
timer ,,,Will hubin  fm9r
retracts ..e flight 10-15 triple but no steering on the front