stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: John Witt on August 03, 2010, 05:38:34 PM
-
Has anyone yet downloaded and used the latest CC firmware version? This would be firmware version 3.255. I'm currently on 3.200.
From a look at the graphs provided it seems that the need for endpoint calibration doesn't affect us, since the timers (usually) send a 1 msec signal to the ESC to allow it to arm, and the opposite (2 msec) endpoint is generated by the ESC as it chugs along in governor mode.
I gather from the blurb on the CC website that this has been a problem with various RC transmitters.
I also assume the rpm scale shown on the graph has one too many zeros and the rpm range is 5000 to 25000.
Comments anyone? I'm always reluctant to change from a known OK software version, especially if I have to start doing some kind of re-calibration.
John Witt
-
John,
I have downloaded and used the 3.255, is seems to just work with no issues. I am still working through some setup issues to get a little better performance but I had no problem using the new version.
Best, DennisT