stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: Dennis Toth on September 24, 2018, 06:46:19 PM

Title: In-runner update?
Post by: Dennis Toth on September 24, 2018, 06:46:19 PM

Looking at a few projects that an in-runner would work really well from a structural/building point of view. This would be a 35 size ship. Neu had some motors that worked well in stunt but they were for a 60 size ship. What in-runners are out there and what sizes work for us?

Best,   DennisT

Title: Re: In-runner update?
Post by: John Rist on September 24, 2018, 08:58:05 PM

Looking at Hobby King most in-runners are for car, boat or EDF fan motors.  Not sure why you need an in-runner.

Title: Re: In-runner update?
Post by: Peter Germann on September 25, 2018, 02:28:34 AM

check L- types at: https://www.leomotion.com/ (https://www.leomotion.com/)

Title: Re: In-runner update?
Post by: Dennis Toth on September 25, 2018, 02:31:04 PM

Peter,
The site is interesting and looks like they have a number of motors. Does anyone in Europe fly any of these motors?

John,
The reason I am looking at the in-runner is to fit a particular model that makes the mounting very simple with the in-runner and would be more work with the out-runner. I remember Mike Palko used a NEU 1900 series in-runner in his Mustang with good results. Just looking for a smaller version of that motor.


Best,  DennisT

Title: Re: In-runner update?
Post by: Peter Germann on September 26, 2018, 02:44:28 AM

To my knowledge, Dennis, no C/L use at this time. For specific questions I suggest to contact owner Urs Leodolter. Or check you may want to check:
https://www.ecalc.ch/motorcalc.php?castle&lang=en (https://www.ecalc.ch/motorcalc.php?castle&lang=en) where Leodolter motor data are on file