Firstly, today was the very first time I charged an electric plane. I have very little knowledge of electric CL.
Today's bench run went well. The FM-9 time worked as expected with delay, then good power. I stopped the run after 15 seconds at full power.
The concern was when I went to discharge to storage voltage. The discharge aborted, noting an imbalance, perhaps 0.25v. I repeated the discharge, which is proceeding. Should it finish, looks like it will take six hours or so (0.45S rate, 3350 4S pack.)
Thoughts about the discharge concern, or other thoughts?
thanks,
Peter