stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: ron young on June 27, 2016, 05:24:06 AM

Title: i need replacement for Arrowind n2812/10
Post by: ron young on June 27, 2016, 05:24:06 AM

    So i broke my arrowind outrunner and cant seem to find one.Nose dive broke shaft in mine ,its in a fancy pants would like to replace with same basic motor,or a simalar brand ?
Thanks
Ron

Title: Re: i need replacement for Arrowind n2812/10
Post by: Bob Hudak on June 27, 2016, 05:49:59 AM

Psst. Ron go on ebay look at a Emax 2812/10, Emax is the same as a Arrowind but cost less.
              Bob
P.s. look for the sale that offers free shipping

Title: Re: i need replacement for Arrowind n2812/10
Post by: ron young on June 27, 2016, 04:02:21 PM

     Thanks Bob will do.
  Ron

Title: Re: i need replacement for Arrowind n2812/10
Post by: Tim Wescott on June 27, 2016, 05:39:22 PM

And check to see if the case is damaged -- if it's not, you may be able to replace the shaft (if you can find something).

Title: Re: i need replacement for Arrowind n2812/10
Post by: Fred Underwood on June 27, 2016, 05:54:32 PM

If interested,

http://www.headsuphobby.com/Replacement-Motor-Shaft-for-Emax-GT2812-Motor-5mm-x-56mm-Z-105-32.htm

or the motor

http://www.headsuphobby.com/Emax-GT2812-10-970kv-Outrunner-Brushless-Motor-B-166.htm

Title: Re: i need replacement for Arrowind n2812/10
Post by: ron young on June 28, 2016, 03:59:00 PM

   

Thanks for the help guys ,i found em on e-bay and ordered from china i wish i would have waited ,oh well i will keep this info thanks again.