This setup is what I have been able to do to implement a control line like system using all RC control.
The plane has 28" wingspan and is a BP hobbies flat foamy. It uses a GWS outrunner, 8x6 prop and an $18 speed control with governor mode. The line is very short at 20' to keep the power requirements low. It flies overhead 8s on about 90w. Economy of the system is what interests me. The rest of the system is shown in the video. A video of it flying will be posted here later. I have to give credit to Igor Burger who was the inspiration for this work.

Hers is the link to the video:



For brevity here is the link to the first flight video

Alan
I could not make a flight video this PM. It will have to wait at least a week due to a trip out of town.
I have flown the plane and progressed to horizontal, vertical and overhead 8s as well as inverted and inside and outside loops. Hopefully I will have the flight video around June 16-20.

Hi

Here is the link to the First flight video. I plan to add a second flight video in about 1 week.



The equipment description video link (previously shown above) is:



Thanks again to Igor Burger for inspiration, information and encouragement.