Author Topic: first try arf nobler to elec (Read 819 times)

ron young · « **on:** June 25, 2013, 04:45:58 PM »

Hi guys let me know if you think the following will get me airborn
Turnigy-3542-1100
turnigy 45asbec
kr2
10-5.8 apc
will begin with zippy 20c-2200ma because are here and available(will order 2650 for later)
I will try to fly beginner pattern only im just getting inverted (45 %) but it will come ive only this week begun to manage lazy eights.
i will post how i plan to install motor
Ron

ron young · « **Reply #1 on:** June 25, 2013, 04:57:21 PM »

Well i have this Top-Flite arf nobler.I intend to cut off leading motor mounts and make a box 1 3/4X1 3/4 x 1 3/8 deep ,1/8 ply 1/2 balsa 1/8 ply 1/2 balsa 1/8 ply bolted through existing firewall,battery and components hopefully will fit in fuel tank area wich is about 1 3/4x3 1/8x4 7/8. i believe allan hahn and some others have done it simalarly.Do you think firewall will need stiffening ,will this all add up to to much weight.
I have no way to wegh things at this point but your thoughts will be appreciated
Thanks
Ron

Jeff Traxler · « **Reply #2 on:** June 25, 2013, 08:54:08 PM »

Harbor Frieght has a couple different digital scales cheap.The one I weigh my small stuff(under a kilo)was only about $12.00.That can give you an idea of what components weigh.

Dean Pappas · « **Reply #3 on:** June 25, 2013, 09:32:41 PM »

Hi Ron,
Do look through the List You Setup thread: lots of ARF Noblers there.

Regards,
Dean P.

Author Topic: first try arf nobler to elec (Read 819 times)

ron young

first try arf nobler to elec

ron young

Re: first try arf nobler to elec

Jeff Traxler

Re: first try arf nobler to elec

Dean Pappas

Re: first try arf nobler to elec