Electric Stunt > Gettin all AMP'ed up!
Fiorotti Timer
Larry Wong:
has anyone have idea on how to extend the start button on a full fuselage ? HB~>
Ken Culbertson:
--- Quote from: Larry Wong on October 15, 2021, 02:10:40 PM ---has anyone have idea on how to extend the start button on a full fuselage ? HB~>
--- End quote ---
There seem to be no really great options. You can glue a dowel extension of the same diameter or do what I am doing and mount it to the back of a removable hatch. One thing I really liked about the Huben was the optional start button.
Ken
Rogerio Fiorotti:
Solutions for profiles.
Rogerio Fiorotti:
Full fuselage solutions
Fred Underwood:
It has been reported that CA and/or kicker can ruin the switch, so be careful if gluing an extension. From what i can tell, the switch is a 2 pin momentary micro button switch. On the older version, the button is about 6mm above the face of the switch. One of the switches below might work. I had an old non working timer and removed the switch without too much difficulty.
https://www.amazon.com/TWTADE-Momentary-ButtonTact-Assortment-QC-9V-2P/dp/B085SWHFMK/ref=sr_1_4?dchild=1&keywords=push+button+micro+switch+2+pin&qid=1634337907&sr=8-4
https://www.ebay.com/itm/292275046056?hash=item440cf346a8:g:GzAAAOSwKNJZzx5I
https://www.ebay.com/itm/293696573394?hash=item4461ae0fd2:g:T7kAAOSwGQJfPGB1
See sellers store for other length.
Update to this.
The button switch on V4 is 2 pin and fairly easily removed. I was going to change the V6 to a longer button switch, but the V6 has a 4 pin switch and a chip is on the other side of the board blocking easy access to the solder joints. I did not try to work on the V6.
Navigation
[0] Message Index
[#] Next page
Go to full version