stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: Bob Hunt on January 10, 2013, 10:32:42 PM

Title: Electric Hardnose Installation Manual
Post by: Bob Hunt on January 10, 2013, 10:32:42 PM

Hi all:

I have just finished the Instruction Manual for the electric Hardnose Motor Mount that I offer. The PDF of this manual is available for free. Just send me your email address and I'll send you a copy by return email. My email address is robinhunt@rcn.com

Later - Bob Hunt

Title: Re: Electric Hardnose Installation Manual
Post by: Tom Niebuhr on January 11, 2013, 10:05:20 AM

This is a tutorial that everyone should look at.

Title: Re: Electric Hardnose Installation Manual
Post by: John Hammonds on January 11, 2013, 06:18:16 PM

Seconded, more of a construction article than an instruction manual.

I really appreciate this being made available.

Thanks Bob.

TTFN
John.

Title: Re: Electric Hardnose Installation Manual
Post by: Crist Rigotti on January 11, 2013, 09:45:43 PM

Super Duper, my man!

Title: Re: Electric Hardnose Installation Manual
Post by: James Mills on January 12, 2013, 08:20:26 PM

Bob,

Thanks for sending me a copy, very helpfull read.  Will put it to use on the Junar I'm building.

James

Title: Re: Electric Hardnose Installation Manual
Post by: Dennis Adamisin on January 18, 2013, 05:37:04 PM

Manuals?  We don't need no steenking manuals!

Well I finally got a round tuit, downloaded and read the manual  It is of course, well written and well illustrated, hard for even me to mess up.  The mounts themselves are beautifully made and incredibly tough.

Bob just keeps on pushing at the "bleeding edge" - THANKS!

Title: Re: Electric Hardnose Installation Manual
Post by: Rodrigo Mansano on January 19, 2013, 07:26:50 AM

Bob, I sent you a message asking for the manual, but I think you didnt receive it! I will be very glad if you send it to me!

Thanks!

Rodrigo Mansano
Brazil

Title: Re: Electric Hardnose Installation Manual
Post by: John Rist on January 19, 2013, 08:33:46 AM

Bob,

As you know I recently bought one of you motor mounts for a 576 Ringmaster build.  The Ringmaster is a profile ship but it looks like your mount will work very well.  You sent me a copy of you manual.  Well done!  Although it is for a built-up ship it has much info that will work on a profile.  As time goes on I will post my version of your mount in my Ringmaster.  I have started a build thread in the Getting all Amped up catagory on Stunthanger.

Title: Re: Electric Hardnose Installation Manual
Post by: Rodrigo Mansano on January 20, 2013, 06:06:52 AM

Hi Bob! Thanks for sending the manual! I want two for my new projects!

Rodrigo Mansano
Brazil