News:


  • May 23, 2024, 11:29:48 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Profile electric motor mounts  (Read 655 times)

Offline John Rist

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2952
Profile electric motor mounts
« on: May 31, 2012, 01:44:26 AM »
Looking through the electric postings I see many examples of mounting motors on a profile ship with the use of right angle aluminum mounting brackets.  Does anyone make and sell these brackets?
Logged
John Rist
AMA 56277

Offline William DeMauro

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 796
Re: Profile electric motor mounts
« Reply #1 on: May 31, 2012, 02:58:34 AM »
John,
 I use 1/16 thick aluminum angle iron that I buy in Home Depot for a few dollars for a 3 foot length for the profiles that I make. I cut to size and drill.
William
Logged
AMA 98010

Offline John Rist

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2952
Re: Profile electric motor mounts
« Reply #2 on: May 31, 2012, 06:52:52 AM »
Quote from: William DeMauro on May 31, 2012, 02:58:34 AM
John,
 I use 1/16 thick aluminum angle iron that I buy in Home Depot for a few dollars for a 3 foot length for the profiles that I make. I cut to size and drill.
William

YES - OK!!!  Now why didn't I think of that.   As an extrusion it should be hard and rigid.   y1   H^^
Logged
John Rist
AMA 56277

Offline builditright

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1039
  • So happy to be alive!
Re: Profile electric motor mounts
« Reply #3 on: June 09, 2012, 03:39:14 AM »
John

I realize Lee hasn't finished this project yet but check out his post
on the E-mount setup I made for the Banshee he's converting to Electric.

http://stunthanger.com/smf/index.php?topic=23682.msg227802#msg227802

Logged
Thank you and God Bless
Walter
aka/ builditright

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here