stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: jose modesto on August 15, 2011, 10:37:58 AM

Title: Electric 2011 Nat's SATURN IMPACT
Post by: jose modesto on August 15, 2011, 10:37:58 AM

Posting some photos of my Nat's model "SATURN IMPACT"
The model is built around a built up lost foam Saturn wing and flaps,Carbon fiber cloth Impact fuse,with SV22 foam stab and elevators with pattern master aerodynamics.
The model was to be a tween rudder with out dorsal. After seeing Randy Powell's model i chicken out and added the full fin and rudder.
Flying weight 63oz
wing area 660Si
motors platt 15-16 20-13  Axi 2826-10 and finally Eflite 25
Timer Hubin FM9
 Controller's Shuiltzie and castle
The E flite 25 was used during the Nat's competition
The model at appearance judging was nor flown. The flaps,elevators and rudder were not glued in place just held by the hinges.
The polishing was done the afternoon of appearance judging (really well prepared)
Jose Modesto

Title: Re: Electric 2011 Nat's SATURN IMPACT
Post by: jose modesto on August 15, 2011, 10:45:36 AM

Added photos
Note:  Photo #3 The graphics for the name and number were created bu Sina. I gave him the name Saturn Impact and he came back with the planet saturn and the word impact. Sina had a local guy make the paint mask used on this model.
Jose Modesto

Title: Re: Electric 2011 Nat's SATURN IMPACT
Post by: Wynn Robins on August 15, 2011, 02:42:38 PM

looks good Jose - looks like you have too many models now HA !!!

Title: Re: Electric 2011 Nat's SATURN IMPACT
Post by: jose modesto on August 15, 2011, 02:45:28 PM

wynn. not enough good electric models for competition. how is your conversion going. Wynn can you post photos of your Yatsenko conversion to electric.
Jose Modesto

Title: Re: Electric 2011 Nat's SATURN IMPACT
Post by: Wynn Robins on August 15, 2011, 05:03:42 PM

should have it finished this week - hope to fly it in the weekend - will post pictures when it is done.