stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: pat king on January 15, 2013, 09:01:33 AM

Title: E-Streak
Post by: pat king on January 15, 2013, 09:01:33 AM

I will be offering a laser cut kit for the E-Streak. The airplane is designed for a 3536 motor. A "plug and fly" drive system is available from RSM Distribution. The design has a flat floor battery mounting surface set into the wing. Let me know if there is any interest.
Thanks,  Pat

Title: Re: E-Streak
Post by: Duke.Johnson on January 15, 2013, 11:31:21 AM

How much$?

Title: Re: E-Streak
Post by: Michael Alurac on January 15, 2013, 11:41:56 AM

I'm interested...

Title: Re: E-Streak
Post by: pat king on January 15, 2013, 12:42:18 PM

The first kits will sell for $78.00 that includes the rear outboard bearing, shipping, and insurance. You can get the complete power setup from RSM or any part of it. Each RSM drive system is fully bench tested and adjusted before it is shipped. Of course you can select all the drive components if you choose to do so. The airplane is a good way for a flyer to get into electric C/L. 

Thanks,  Pat

Title: Re: E-Streak
Post by: George Grossardt on January 16, 2013, 05:18:34 AM

When will they be available?

Title: Re: E-Streak
Post by: john e. holliday on January 16, 2013, 09:36:39 AM

Thanks for reminding me that I haven't beenon the Ring site lately.   Had to log in again so I could verify there is a E-Ringmaster.  Still working on getting an electric setup.   By the way the E-Streak looks good.

Title: Re: E-Streak
Post by: pat king on January 16, 2013, 10:34:19 AM

As I said above, the first kits will sell for $78.00 shipping and insurance included. Kits take from 3 to 4 weeks after they are ordered depending on the backlog at the laser cutter. I am going to order two sets of parts today. You can order using PayPal to:
patdk at aol dot com
or send a check to:
Pat King
5133 W. Jason Dr.
Monee, IL 60449
I do not deposit checks until the kit has shipped.
Thanks,  Pat