stunthanger.com

Electric Stunt => Gettin all AMP'ed up! => Topic started by: Motorman on September 10, 2012, 07:48:53 PM

Title: E Flight Q
Post by: Motorman on September 10, 2012, 07:48:53 PM

blank

Title: Re: E Flight Q
Post by: Wynn Robins on September 10, 2012, 08:43:17 PM

depends on your timer - most give a drop in RPM about 5 seconds before cut - followed by a burst of higher RPM to get your landing speed up.

Title: Re: E Flight Q
Post by: john e. holliday on September 11, 2012, 08:34:38 AM

If you have a timer on the set up, then you need a stop watch on you to tell the time left.

Title: Re: E Flight Q
Post by: John Cralley on September 11, 2012, 11:47:42 AM

What Wynn says. All the timers I know about give an RPM bleep a few seconds before cutoff.

You can also invest in a small "talking timer" which count down minutes then every ten seconds and finally second by second. The one I have will clip on your shirt pocket.

Title: Re: E Flight Q
Post by: Wynn Robins on September 11, 2012, 09:39:19 PM

Quote from: john e. holliday on September 11, 2012, 08:34:38 AM

If you have a timer on the set up, then you need a stop watch on you to tell the time left.

interesting.....  I know that my flight time is always 5:50 (that how it sets) I know that I have about 5 laps after the completion of the clover before i get the end of flight RPM signal -

no stopwatch needed