stunthanger.com
Electric Stunt => Gettin all AMP'ed up! => Topic started by: John Rist on August 04, 2018, 08:57:21 AM
-
It seem that it is common to cut down an APC electric prop to match a motor battery combination. For may E-Cavalier I cut down a APC 12x6 EP marked F2B to an 11-1/2 x 6. In order to get repeatable results I built a fixture to mark the cut off point on the tips. It amounts to a block of wood a drill bit and a cardboard template. Photos should explain.
-
I guess I'm just old school. Once I get my prop cut down to the desired diameter, I just put on bigger wheels...
Mark